Adding a Reorder Level to a Stock Code
From Catalyst
Revision as of 10:10, 30 April 2010 by Nigel Smith (talk | contribs)
 |
This article or section is under review. Be aware: Content may change as the document is reviewed. |
Summary
The following article explains how to add a re-order level to a part number.
Additional Information
Select " Stock Control Add or Edit Stock Items".
- This will take you to a search screen. Type either the stock code of the item required (e.g. 'NGK1234') or the the description (e.g. NGK Spark plug).
- Click twice on the item for which you want to add a reorder level.
- Press <F4> to take you to the "Depots" Screen.
- Move to the "Reorder Level:" field.
- Enter the level this item must fall below to be reordered.
 | If you set the reorder level to two then the stock code will appear on the reorder report when its stock level reaches one. |
- Press <Esc>.
- Then press <Enter> to save the settings.
- Finally press <Esc> to return to Stock Properties.
See also
- Creating a Stock Item
- Adding a Stock/Bin Location to a Stock Code
- Adding Supplier Information to a Stock Code
- Adding a Maximum Level to a Stock Code
- Linking a Supplier Barcode to a Stock Item
- Creating Stock Groups
