Linking a Supplier Barcode to a Stock Item
From Catalyst
Revision as of 16:28, 19 June 2008 by Richard Green (talk | contribs) (New page: {{Review}} == Summary == The following article explains how apply a supplier barcode to a stock code. This is useful if your items come pre-labelled but you do not wish to use the supplie...)
|
This article or section is under review. Be aware: Content may change as the document is reviewed. |
Summary
The following article explains how apply a supplier barcode to a stock code. This is useful if your items come pre-labelled but you do not wish to use the suppliers stock codes as you have created one yourself
Additional Information
Select "Stock Control" -> "Add or Edit Stock Items".
- This will take you to a search screen. Type either the stock code of the item required (e.g. 'NGK1234') or the the description (e.g. NGK Spark plug).
- Click twice on the item for which you want to add a Supplier Barcode to.
- Press <F3> to take you to the "Barcodes" Screen.
- From here simply scan the items Barcode label using a standard barcode scanner and this will fill the field with the correct information for you.
- Press <Esc>.
- Then press <Enter> to save the settings.
- Finally press <Esc> to return to Stock Properties.
See also
- Creating a Stock Item
- Adding a Stock/Bin Location to a Stock Code
- Adding Supplier Information to a Stock Code
- Adding a Reorder Level to a Stock code
- Adding a Maximum Level to a Stock Code
- Creating Stock Groups