Adding a stock/bin location to a stock code
From Catalyst
Revision as of 06:42, 23 May 2008 by Charles Allison (talk | contribs)
Summary
The following article explains how to add a Bin Location to a part number.
Additional Information
Select "Stock Control" -> "Add or Edit Stock Items".
- This will take you to a search screen. Type either the stock code of the item required (e.g. 'NGK1234') or the the description (e.g. NGK Spark plug).
- Click twice on the item for which you want to add a location.
- Press <F4> to take you to the "Depots" Screen.
- Move to the "Stock Location:" field.
- Enter a Rack or Bin number in the "Stock Location:" field. This field will take letters and numbers, so make sure your location codes are all the same length if you want them to be in order. For example, if you have locations A1 - A99, you should make sure that you enter the locations as "A01", "A02" and so on up to "A99".
- Press <Esc>.
- Then press <Enter> to save the settings.
- Finally press <Esc> to return to "Stock Properties".
See also
- Creating a Stock Item
- Adding a Reorder Level to a Stock Code
- Adding Supplier Information to a Stock Code
