Works Order Configuration - Works Order Processing Document

From Catalyst
Revision as of 06:17, 10 May 2017 by ThrashBot (talk | contribs) (Updated from revision control)
Jump to: navigation, search

The Platinum System "Works Order Processing" allows the layout of your Works Orders to be configured to print the details you require. This is done using a system of "tokens" which represent the items you wish to print, and their positions on the document.

Layout Tokens

Tokens are indicated by the character '~' followed by a number (the token identifier).

These identifiers may be up to 3 digits in length in the range 1 to 999. Tokens each have specific uses, which are listed below.

Parameters

Some tokens may also be given parameters. The number of parameters vary for each token. To specify a token with parameters the token must be followed by a comma then parameter. Each parameter is similarly divided from the next by a comma (no terminating comma is required).

Token File Names

The layout files are stored in the 'sxco1\docs' folder, (or 'sxco2', 'sxco3', etc).

'SXWO005.EPL'
Works Order layout.

Tokens

General Tokens

~1,n
(40 characters)
System Company Name Line 1
n = 1 -> 40
Width
~3,n
(40 characters)
System Company Name Line 2
n = 1 -> 40
Width
~3,n
(50 characters)
System Company Address Line 1
n = 1 -> 50
Width
~4,n
(50 characters)
System Company Address Line 2
n = 1 -> 50
Width
~5,n
(50 characters)
System Company Address Line 3
n = 1 -> 50
Width
~6,n
(50 characters)
System Company Address Line 4
n = 1 -> 50
Width
~7,n
(50 characters)
System Company Address Line 5
n = 1 -> 50
Width
~13
(60 characters)
Order Detailed Notes
This token must be on a line of its own.
~14
(30 characters)
User Date - Long format
~15
(10 characters)
User Date - Short format
~16
(3 characters)
Page Number
~17
(8 characters)
Order Number
~18,n
(15 characters)
Order Stock Code
n = 1 -> 15
Width
~19,n
(30 characters)
Order Stock Description Line 1
n = 1 -> 30
Width
~20,n
(30 characters)
Order Stock Description Line 2
n = 1 -> 30
Width
~21,n
(30 characters)
Order Stock Description Line 3
n = 1 -> 30
Width
~22,n
(6 characters)
Order Depot Code
n = 1 -> 6
Width
~23,n
(30 characters)
Order Depot Name
n = 1 -> 30
Width
~24,n
(12 characters)
Order Stock Location at Depot
n = 1 -> 20
Width
~25
(13 characters)
Order Stock Maximum Level
~26
(13 characters)
Order Stock Quantity at Depot
~27
(13 characters)
Order Stock Reorder Level
~28
(13 characters)
Order Stock Quantity on Purchase or Works Orders
This will only take into account Works Orders activated before the one currently being printed.
~29
(13 characters)
Order Stock Allocated to Sales or Works Orders
This will only take into account Works Orders activated before the one currently being printed.
~30
(13 characters)
Order Stock "Free Stock"

(Stock + On Order - Allocated) = "Free Stock"

This will only take into account Works Orders activated before the one currently being printed.
~31
(13 characters)
Works Order Quantity
~32
(30 characters)
Order Expected Start Date - Long format
~33
(10 characters)
Order Expected Start Date - Short format
~34
(30 characters)
Order Due Date - Long format
~35
(10 characters)
Order Due Date - Short format
~36
(30 characters)
Order Complete Date - Long format
~37
(10 characters)
Order Complete Date - Short format
~38
(4 characters)
Order Time Difference
~39,n
(50 characters)
Order Notes Line 1
n = 1 -> 50
Width
~40,n
(50 characters)
Order Notes Line 2
n = 1 -> 50
Width
~75,n,m,l Form Length
This code must be on it's own line, as everything else on a line that has this token will be ignored.
n
Current line number.
m
Form Length.
l
Form Break.

Component List

Prints a list of Components. If these occur between '~100' & '~199' they will print Components attached to the relevant Process; otherwise they will print a list of components from the main Parts File.

~41,n
(15 characters)
Column for Component Stock Code
n = 1 -> 15
Width
~42,n
(30 characters)
Column for Component Stock Description
n = 1 -> 30
Width
~43,n
(12 characters)
Column for Component Stock Location at Depot
n = 1 -> 20
Width
~44
(13 characters)
Column for Component Stock Maximum Level
~45
(13 characters)
Column for Component Stock Quantity at Depot
~46
(13 characters)
Column for Component Stock Reorder Level
~47
(13 characters)
Column for Component Stock on Purchase/Works Order
This will only take into account Works Orders activated before the one currently being printed.
~48
(13 characters)
Column for Component Stock Allocated
This will only take into account Works Orders activated before the one currently being printed.
~49
(13 characters)
Column for Component Available Stock

Stock - Allocated = Available.

This will only take into account Works Orders activated before the one currently being printed.
~50
(13 characters)
Column for Component Stock Quantity Required
~51,"x" Column of n dots

E.g. '~51,5' gives '.....' (useful for showing where a signature is required)

"x"
Character to replicate.

Process List

Prints Processes attached to this Order. If these occur between '~100' & '~199' they will print the details of the current Process in the breakdown. Otherwise a list, in columns, of Processes will be printed.

~52,n
(20 characters)
Column for Process Name
n = 1 -> 20
Width
~53,n
(30 characters)
Column for Process Description
n = 1 -> 30
Width
~54
(13 characters)
Column for Process Estimate Unit Time

Breakdown of Processes with Associated Components

This is entered as a block of tokens, which will be repeated for each Process on Order.

The block MUST start with the token '~100' and end with the token '~199', otherwise nothing in the block will be printed at all.
~100 Start Process Breakdown Block
This token must be on a line of its own.
~199 End Process Breakdown Block
This token must be on a line of its own.
~101
(60 characters)
Process Detailed Notes
This token must be on a line of its own.

Print Style Tokens

The following print style codes must have 3 spaces after them as these codes always 6 characters wide.

~79
(6 characters)
Expand
~80
(6 characters)
Unexpand
~81
(6 characters)
Compact
~82
(6 characters)
Uncompact
~83
(6 characters)
Double Strike On
~84
(6 characters)
Double Strike Off
~86
(6 characters)
Paper Forward
~87
(6 characters)
Paper Backward
~88,n
(up to 32 characters)
Insert print style

This print style code doesn't need any spaces after it as it will the width of the print code to insert.

n = 1 -> 999
Corresponds to the print code ID in the "Print Code Amendments".
Retrieved from "https://www.catalyst-uk-support.com/kb/index.php?title=Works_Order_Configuration_-_Works_Order_Processing_Document&oldid=27374"