Adding a stock/bin location to a stock code

Summary

The following article explains how to add a Bin Location to a part number.

More Information

Select " Stock Control\Counter Operations Add or Edit Stock Items".

• This will take you to a search screen. Type either the stock code of the item required (e.g. 'NGK1234') or the the description (e.g. NGK Spark plug).
• Click twice on the item for which you want to add a location.
• Click on the "Location" field to enter a location.

Alternatively press <F4> or click on the [Depots] tab.

• Click in the "Location" field for your Depot.
• Enter a Rack or Bin number in the "Location" column. This field will take letters and numbers, so make sure your location codes are all the same length if you want them to be in order. For example, if you have locations A1 - A99, you should make sure that you enter the locations as "A01", "A02" and so on up to "A99".

This field is case sensitive and so "A99" is different to "a99".

• Press <Esc>.
• Click [Accept] to save the settings.

See also

• Creating a Stock Item
• Adding Supplier Information to a Stock Code
• Adding a Reorder Level to a Stock Code
• Adding a Maximum Level to a Stock Code
• Creating Stock Groups
• Creating a New Stock Status

Feedback

Thank you for using our Knowledge Base, we value your feedback. Did you find this article useful? 'Yes' or 'No'

Keywords AND Misspellings

Stock, Bin, Locations