Why is my Web Daemon not contactable?

From Catalyst
Revision as of 06:34, 22 December 2018 by ThrashBot (talk | contribs) (Bulk update)
Jump to: navigation, search

Summary

If you are using the Platinum Web Daemon module as part of our E-Commerce solution, the Platinum system needs access to our FindIt servers 24/7. As part of our commitment to ensure your E-Commerce system is running smoothly our servers attempt to contact your Platinum system every 15 minutes. If the server is unable to make contact it will send an Email to a designated Email address at your company.

Below are some items to check if you should receive this Email.

More Information

Check Network Connection

The first thing to check is that the PC which is running the Web Daemon is able to access the PC running the Browser Daemon which is usually the Platinum server. If the Browser Daemon is running on the Platinum server the easiest way to do this is to open My Computer and then open the 'Public' drive, usually 'P:\'.

If you are able to open the 'Public' drive in a normal manner the next thing to check is that this computer has internet access. Simply open your web browser and attempt to open any external website.

Check Browser Daemon (Old Version)

The Browser Daemon needs to be running all the time for the Web Daemon to operate correctly, this is usually configured to run on the Platinum server. On this PC there should be a Platinum window open with a status window with the following message :

"Please Wait... Awaiting requests..."

"Status: Listening"

If you cannot see this window load up a new copy of Platinum and choose [Browser Daemon] from the main menu and you should now see the above status window.

Check Web Daemon

If the Browser Daemon is running and the Web Daemon PC is able to contact this machine the next thing to check is that the Web Daemon is running correctly.

On the Web Daemon PC click on " Start Control Panel Administrative Tools Services". In the list of services there should be Catalyst Browser Daemon Server with a status of 'Started'. If the status column is blank right click on the service and choose 'Start'.

Check Platinum Backup

Check the machine which is configured to run your SXBackup. If there is a message on screen to show the backup is running or has found users in the system you will not be bale to access Platinum Online. The Web Daemon is temporarily stopped whilst the backup runs.

Wait for the backup to finish or answer the message on screen with either [Abort], [Retry] or [Cancel]. Remind users they need to make sure they correctly exit Platinum at the end of the day to allow the backup to run.

Contact Catalyst

If the Browser Daemon and Web Daemon are running correctly and the PC's have network and internet access and you are still receiving Emails that the Web Daemon is not contactable please Contact your Platinum dealer or our support team on 0116 230 1500 or by using our website support contact page.

See also


Feedback
Thank you for using our Knowledge Base, we value your feedback. Did you find this article useful? 'Yes' or 'No'
Keywords AND Misspellings
web daemon, browser daemon, setup, e-commerce, website, contact